Amana LE8517L2 Dryer Manual

The Amana LE8517L2 is a high-efficiency dryer designed to provide optimal drying performance for your laundry. With a variety of settings and features, this dryer ensures that your clothes come out perfectly dry every time. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Power 7. Operating the Dryer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key features include: multiple drying cycles, moisture sensor, energy efficiency, and a large capacity drum.

Feature	Description
Moisture Sensor	Automatically adjusts drying time based on moisture levels.
Multiple Drying Cycles	Offers various settings for different fabric types.
Energy Efficiency	Designed to use less energy while providing optimal drying.
Large Capacity Drum	Accommodates larger loads for fewer cycles.
Lint Filter	Easy to clean for optimal performance.

Installation

Ensure proper installation for optimal performance. Follow these steps:

Choose a location with adequate ventilation.
Connect to a power source as per the specifications.
Level the dryer using adjustable legs.
Ensure the venting system is properly installed.

WARNING! Improper installation can lead to fire hazards. Follow all safety guidelines.

First-Time Setup

Power on the dryer and follow the on-screen prompts to set preferences.

Select preferred drying cycle.
Adjust settings for fabric type.
Test run with a small load to ensure proper operation.

CAUTION! Ensure all connections are secure before operating.

Specifications

Model: Amana LE8517L2.
Dryer Type: Electric.
Capacity: 7.0 cu. ft.
Power Supply: 240V, 30A.
Dimensions: 27" W x 29" D x 43" H.
Weight: 120 lbs.
Energy Star Rated: Yes.

Controls and Settings

Access the control panel to select drying cycles and adjust settings. The panel includes buttons for power, cycle selection, and temperature settings.

Tip: Refer to the user manual for detailed descriptions of each cycle.

Connecting Power

Ensure the dryer is connected to a suitable power source.

Use a dedicated circuit for the dryer.
Check voltage requirements before connecting.
Ensure all connections are tight and secure.

Tip: Consult a professional electrician if unsure about connections.

Operating the Dryer

To operate the dryer, follow these steps:

Load clothes into the drum.
Select the desired drying cycle.
Press the start button to begin drying.
Monitor the drying process and adjust settings if necessary.

WARNING! Do not overload the dryer; it can affect performance.

Maintenance and Care

Regular maintenance is essential for optimal performance. Clean the lint filter after every use and check the venting system periodically.

CAUTION! Unplug the dryer before performing any maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer won't start	Power supply issue	Check power connection and circuit breaker.
No heat	Heating element failure	Inspect and replace heating element if necessary.
Clothes not drying	Overloading or vent blockage	Reduce load size and check venting system.
Excessive noise	Foreign objects in drum	Inspect drum for objects and remove.

Reset: Disconnect power for 5 minutes to reset the dryer.